45
and data may be lost. Please always switch off the Player by pressing the
power button on the device or on the remote control and wait until the power
button on the Player lights up red.
Q: Why is the power button still lit in blue even though I have switched
it off?
A:
The loading or saving of the current system settings takes approx. 10
seconds. The illumination of the power button changes to red only after all
settings have been saved and the Player has entered the standby mode. If
you want to, you can then disconnect the Player from the mains supply.
Q:The language of the user interface has been changed. How do I
change the language?
A: In order to change the selected language, enter the "Settings " menu by
pressing the "SETUP" button on your remote control. Select the right menu
("System ") and press the OK button on your remote control. The available
languages are displayed. Please mark the desired language and confirm
your choice by pressing the OK button.
Q: I have adjusted the settings of the Player under "Settings" and would
like to restore the factory defaults.
A: As described in the "
Changing System Settings
" chapter, execute the
menu item "Restore defaults ". The Player will be reset to the factory defaults.
The saved files are not deleted when you do this.
Q
：
When I try to disconnect the USB device, I keep on getting The
device Generic volume cannot be stopped right now. Try stopping the
device again later message, what should I do?
A
：
Close any program that might be accessing data on the player, including
Windows
®
Explorer. If it does not work, close all programs and wait for
another 20 seconds, then try the green arrow icon again. If it still does not
work, you should shut down the player and disconnect the USB cable.
