3
NookBox
Installation Guide
Z-Wave Dongle
Identifying the Parts
1. Blue LED
LED ON: Working Normally
Operation
1. Power down the NookBox Control Panel
2. Plug the Z-wave Dongle into the USB port on the Control Panel
3. Power on the Control Panel
4. If the Z-Wave Dongle is detected by control panel, the
“Exclusion”
and
“Z-Wave Reset”
features will be displayed under
Device Management
in the website configuration page.
5. Select “Z-Wave Reset” and click
“Yes”
to reset Z-wave dongle.
6. Refer to Control Panel installation manual and individual Z-wave device manual to learn in and con-
trol your Z-wave devices.
<NOTE>
Do
NOT
plugin / unplug the Z-wave dongle into Control Panel when the panel is powered on.