8
NookBox
Installation Guide
IR Universal Remote Control UPIC-5ZBS
Operation
Control via ZigBee Control Panel
The IR Remote Control can be controlled via Climax ZigBee Control Panels remotely to transmit IR signal. Selec-
ting the appliance type and IR signal number from the Control Panel will control the IR Remote Control to send IR
signal accordingly.
Example:
a. Select “Air Conditioner Function 1” will control the IR Remote Control to send IR signal 1 learnt in Air Condi
tioner appliance type.
IR Signal Coverage & IR LED Selection
The IR Eye of the IR Remote Control includes 6 LEDs which are used to
transmit IR signals, with 1 central LED and 5 surrounding LEDs. The 5
surrounding LEDs are positioned at 45° angle to the PCB board.
LED Signal Coverage: Each LED transmits IR signal in cone
coverage in front of the LED. The LEDs can be selected to
transmit signal for each appliance type by using your Gateway.
Example:
a. If you select LED 1 for Air Conditioner, the IR Remote Control will transmit signal with LED 1 when it trans
mits an Air Conditioner appliance type IR Signal.
b. If you select LED 2 and LED 3 for Home Audio, the IR Remote Control will transmit signal with both LED 2
and LED 3 when it transmits a Home Audio appliance type IR Signal.
When installing the IR Remote Control, select the IR LED used via your Control Panel according to the IR Remote
Control mounting location to allow IR transmitter to send signal to all appliance in your home. Please refer to your
Climax Control Panel manual for more information on IR Remote Control setting and control.
Please refer to diagram below for IR signal coverage:
