Nonstop Station E, Руководство по настройке и использованию

Страница: 4 / 8

To set the time, simply press the HR button and MIN
button to change the alarm time.
Slide the ALARM switch to the "ON" position. When
the alarm is on, the alarm indicator icon will appear
the display.
Setting the Alarm
To snooze, tap the SNOOZE button. The Alarm will
sounds again after 9 minutes. While the alarm is
being snoozed, the Alarm indicator LED will flash .
To reset ALARM to sound again next day, press
switch to the “ON” again.
Using the Alarm
There are three (3) levels of display brightness.
Repeatedly press the DIMMER button to select the
desired setting.
Adjusting the Brightness
1. On the top of the clock, press both "SNOOZE" and
"DIMMER" together to enter year setting mode ，
with the display will begin flashing "20 ", and then
press the HR/MIN buttons to set the year .
2. Press SNOOZE (or DIMMER ） button again to set
the date. The display will begin flashing "1/1 ",
press the HR to set the month and press MIN to
set the day.
3. Press SNOOZE （ or DIMMER button confirm date
set and enter time setting mode. Press the HR and
MIN buttons to set the hours/minutes. (You can
tap or hold down to change the time faster). As
you cycle through, the hours will change from AM
to PM.
4. Press SNOOZE (DIMMER ） button again to confirm
the month and enter to set the DST (auto day light
savings time) mode.
5. Press the HR /MIN button to change
DST"ON"/"OFF"
Press SNOOZE (DIMMER ） button again to confirm
DST,and then exit the set.
Note: the DST by default is ON.
Setting the Date & Time