Nonin Sensmart H500, Руководство оператора

Страница: 31 / 56

25
System Operation
Placing Device in Long-Term Storage Mode
When not using device daily or for storing for long periods of time, life can be
extended by placing the device into Long-Term Storage Mode.
1. Press and hold On/Off button on display until screen prompt appears
2. Choose “Power Off” on screen. Screen will go black. Display is now in
Long-Term Storage Mode.
3. Press and hold the On/Off button on the signal processor until all signal
processor lights flash simultaneously. Signal processor is now in Long-
Term Storage Mode.
To take system out of Long-Term Storage mode for use, follow steps 2-5 in
"Initial System Set-Up" section on page 21.
Data Download
Session data can be downloaded from the display onto a memory stick.
NOTE: Data can only be downloaded via download dongle and memory
stick. Data cannot be downloaded directly from device by use of included
charging cable.
1. Plug USB memory stick into download cable and insert data download
cable connector into the charging port of display.
2. On display start-up screen tap the transfer icon to start the data
download process as shown below.
Figure 12. Start-Up Screen - Select Transfer Icon