Nonin RespSense II LS1R, Руководство оператора, Страница: 35 / 64

29
Using the RespSense II Monitor
Date/Time Screen
This screen allows the operator to set the monitor’s date and time (24-hour clock). The date/time
is used in the file name when downloading data. If the operator will not be downloading data,
setting the date/time is not required.
This screen is accessed through the Configuration Menu (see Access the Configuration Menu ).
1. On the Configuration Menu, press Date/Time . Date/Time screen (figure 10) displays.
2. To select a field, press the up or down arrow for that field. The field highlights.
3. Tap the up arrow to increase the value; tap the down arrow to decrease the value. Steadily
press the arrow to scroll through the values.
4. When finished, press Save to save the date and time, close the screen, and return to the
Configuration Menu. To exit without saving changes, press Cancel .
Figure 10. Date/Time Screen
NOTE: If the monitor shuts off because of a critical battery, the date recorded in patient data
files reverts to 1970:01:01 and the time begins counting from 00:00:00.