Nomadix AG-2000W, Руководство пользователя, Страница: 52 / 254

N
OMADIX
AG-2000
W
™ / AG-2000
WA
™
48 Installing the AG-2000w
Assigning Login User Names and Passwords
When you initially powered up the AG-2000w and logged in to the Management
Interface, the default login user name and password you used was “admin.” The AG-
2000w allows you to define 2 concurrent access levels to differentiate between
managers and operators, where managers are permitted read/write access and
operators are restricted to read access only. Once the logins have been assigned,
managers have the ability to perform all write commands ( Submit , Reset , Reboot ,
Add , Delete , etc.), but operators cannot change any system settings. When
Administration Concurrency is enabled, one manager and three operators can access
the AG-2000w at any one time (the default setting for this feature is “disabled”).
1.
Enter
sy
(system) at the AG Menu .
The System menu appears.
2.
Enter
lo
(login).
The system prompts you for the current login. If this is the first time you are
changing the login parameters since initializing the AG-2000w, the default login
name and password is “admin.”
3.
When prompted, confirm the current login parameters and enter new ones.
S
AMPLE
S
CREEN
R
ESPONSE
System>lo
Enable/Disable Administration Concurrency [disabled ]: e
Current login: admin
Current password: *****
Enter new manager login: newmgr
Enter new password: *******
Retype new password: *******
The administrative login and password were changed
Enter new operator login: newop
Enter new operator password: *****
Retype new operator password: *****
The operator login and password were changed
You must use the new login user name(s) and password(s) to access the system.
The system accepts up to 11 characters (any character type) for user
names and passwords. All user names and passwords are case-sensitive.