Nomadix Access Gateways, Руководство пользователя

Страница: 238 / 330

A
CCESS
G
ATEWAY
226 System Administration

“Displaying the Static Port Mapping Table {Static Port-Mapping}” on page 147

“Adding Static Ports {Static Port-Mapping Add}” on page 223
Blocking a Subscriber Interface {Subscriber Interfaces}
The Access Gateway allows System Administrators to block subscriber interfaces.
1. From the Web Management Interface, click on System , then Subscriber Interfaces . The
Subscriber Interfaces screen appears:
2.
Enable or disable the following items by clicking on the corresponding check box:

Block Subscriber Interface 1

Block Subscriber Interface 2
3.
Click on the
Submit
button to save your changes, or click on the
Reset
button to reset all
values to their previous state.
Updating the Access Gateway Firmware {Upgrade}
Upgrading the Access Gateway firmware is performed from the Access Gateway’s Command
Line Interface (CLI) only. Refer to the Firmware Upgrade Procedure (separate document
available from Nomadix Technical Support).