If any lights do not work on your pre-lighted tree, please check the following:
TROUBLESHOOTING:
1. If entire tree or a section of the tree does not light:
T
roubleshoo
ting
a) Check to be sure that all light set plugs are securely connected.
b) Check that there is power at the electrical outlet.
3. If you are still experiencing problems with the tree, please call 1-866-827-4985 for customer service.
IMPORTANT SAFETY INSTRUCTIONS
When using electrical products basic precautions should always be followed including the following:
,
a)
READ AND FOLLOW ALL SAFETY INSTRUCTIONS.
b) Do not use seasonal products outdoors unless marked suitable for indoor and outdoor use. When products
are used in outdoor applications, connect the product to a Ground Fault Circuit Interrupting (GFCI) outlet.
If one is not provided, contact a qualified electrician for proper installation.
c) This seasonal-use product is not intended for permanent installation or use.
d) Do not mount or place near gas or electric heaters, fireplaces, candles, or other similar sources of heat.
e) Do not secure the wiring of the product with staples or nails, or place on sharp hooks or nails.
f) Do not let bulbs rest on the supply cord or on any wire.
g) Unplug the product when leaving the house, when retiring for the night, or if leaving unattended.
h) This is an electrical product
not a toy! To avoid risk of fire, burns, personal injury and electric shock, it
—
should not be played with or placed where small children can reach it.
i) Do not use this product for other than its intended use.
j) Do not hang ornaments or other objects from cord, wire, or light string.
k) Do not close doors or windows on the product or extension cords as this may damage the wire insulation.
l) Do not cover the product with cloth, paper, or any material not part of the product when in use.
m) Read and follow all instructions that are on the product or provided with the product.
n) 120 V. For indoor use only.
SAVE THESE INSTRUCTIONS
a) Before using or reusing, inspect product carefully. Discard any products that have cut, damaged,
or frayed wire insulation or cords, cracks in the bulb holders or enclosures, loose connections,
b) When storing the product, carefully remove the product from wherever it is placed to avoid any
or exposed copper wire.
Use and care instructions
undue strain or stress on the product conductors, connections, and wires.
Caution
CAUTION
1. Risk of fire. This product does not contain bulb shunts which allow the product to operate if
one bulb burns out.
do not attempt to replace bulbs or modify string.
2. The product consists of non-replaceable LED bulbs. To reduce the risk of fire or electric shock,
2 PLEASE ALWAYS UNPLUG YOUR TREE FIRST BEFORE DO THE FOLLOWING STEPS
.
.
a) Find the connector of unlit section which is near the pole.
b) Pull out the connector, and re-insert it.
c) You may hear a clicking sound if the connector is well inserted.
Federal Communications Commission (FCC) Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device
may not cause harmful interference, and (2) this device must accept any interference received, including interference
that may cause undesired operation.
CAUTION:
Changes or modifications not expressly approved by the party responsible for compliance could
void the user's authority to operate the equipment.
CAUTION:
NOTE:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio communications.
NOTE:
