If the bulb base of the replacement bulb does not fit in the string: (as shown below by the Figs.)
a) Pull the reflector out.
e) Insert the reflector into the base.
b) Remove the base of burned-out bulb by straightening bulb wires and gently pull bulb out.
c) Thread wires of new bulb through holes in old base with one wire in each hole.
d) After bulb is fully inserted into base, bend each wire up, like other bulbs
in the light set so that the wires will touch the contacts inside the
bulb holder (always match the long wire of new bulb to the hook of
bulb base).
Hook
Tab
Unlock
Lock
CAUTION:
1. To reduce the risk of overheating, replace burned-out bulbs promptly. Use
Volt,
3.0
20 mA LED bulbs only. The LED bulb has polarity. Do not deliberately change the direction of the LED
Caution
bulb in the bulb holder. 2. Risk of fire. This product does not contain bulb shunts, which allow the
product to operate if one bulb burns out. Replace bulbs only with the spare bulbs provided with this
product.
1. Grasp plug and remove from its power source.
Replace the fuse.
USER SERVICING INSTRUCTIONS
Power supply cord fuse replacement (replaceable 3 A, 125 V fuse is located in the plastic bag):
a) Before using or reusing, inspect product carefully. Discard any products that have cut, damaged,
or frayed wire insulation or cords, cracks in the bulb holders or enclosures, loose connections,
b) When storing the product, carefully remove the product from wherever it is placed to avoid any
or exposed copper wire.
Use and care instructions
undue strain or stress on the product conductors, connections, and wires.
Replace the lamp.
1. Grasp plug and remove from the receptacle or other outlet device. Do not unplug by pulling on cord.
2. Unlock the burned out LED bulb by lifting the hook.
4. Replace bulb with only 3.0 Volt, 20 mA push-in type LED bulb (provided with product). Always
5. Lock the hook of bulb base by pushing lock down into the tab.
3. Pull bulb and plastic base straight out of bulb holder.
match the hook to the tab.
5. Close fuse cover. Slide closed the fuse access cover on top of attachment plug.
2. Open fuse cover. Slide open fuse access cover on top of attachment plug towards blades.
3. Remove fuse carefully.
4. Risk of fire. Replace fuse only with 3 Amp, 125 Volt fuse (provided with product).
should not be removed. Discard product if the attachment plug is damaged.
6. Risk of fire. Do not replace attachment plug. Contains a safety device (fuse) that
Note: This plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet,
reverse the plug. If it still does not fit, contact a qualified electrician. Do not use with an extension
cord unless plug can be fully inserted. Do not alter or replace the plug.
o) This product is equipped with push-in type bulbs. Do not twist bulbs.
p) Read and follow all instructions that are on the product or provided with the product.
q) SAVE THESE INSTRUCTIONS.
USE
ONL
Y
125V
FUSE
125V
FUSE
3A
MAX.
TS-M7
l) This product has overload protection (fuse). A blown fuse indicates an overload or short-circuit situation. If the fuse
m) Do not cover the product with cloth, paper, or any material not part of the product when in use.
blows, unplug the product from the outlet. Also unplug any additional strings or products that may be attached to the
product. Replace the fuse as per the User Servicing Instructions (follow product marking for proper fuse rating) and
check the product. If the replacement fuse blows, a short circuit may be present and the product should be discarded.
n) This product has a polarized plug (one blade is wider than the other) as a feature to reduce the risk of
electric shock. This plug will fit in a polarized outlet only one way. If the plug does not fit fully in the
outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not use with an extension
cord unless plug can be fully inserted. Do not alter or replace the plug.
