Cautio
n
Caution
CAUTION:
Risk of Fire. Do not replace attachment plug. Contains a safety device (fuse) that shall not
be removed. Discard product if attachment plug is damaged.
To Replace a Lamp:
1.
Grasp plug and remove from the receptacle or other outlet device. Do not unplug by pulling on cord.
2.
Unlock the burned out LED lamp by lifting the hook.
3.
Pull lamp and plastic base straight out of lampholder.
4.
Replace lamp with only 3.0/2.0 Volt, 20 mA push-in type LED lamp (provided with product).
Always match the hook to the tab.
5.
Lock the hook of lamp base by pushing lock down into the tab.
Unlock
Hook
Tab
Lock
If the lamp base of the replacement lamp does not fit in the string: (as shown below by the Figs.)
a)
Pull the reflector out.
b)
Straighten the two wires on the end of the original burned-out lamp and remove the lamp base.
c)
Straighten the wires on the end of the new lamp and remove the lamp base.
d)
Guide the two wires of the new lamp into the two holes of the original lamp base and
bend the wires back (always match the long lead of new lamp to the hook of lamp base).
e)
Insert the reflector into the base.
Connecting Sets End to End (for connect multiple products)
When multiple products are connected together, do not exceed the lowest of the indicated maximum
wattage on the cord tag near the connected product’s receptacle.
CAUTION! TO REDUCE THE RISK OF FIRE AND ELECTRIC SHOCK:
1)
CAUTION:
This is an electric product - not a toy! To avoid risk of fire, burns, personal injury and
electric
shock it should not be played with or placed where small children can reach it.
2)
CAUTION:
To reduce the likelihood of excessive heat and possible damage, use only
decorative lamp accessories packaged with this product or marked for use with this product.
3)
CAUTION:
Do not overload. This product is rated 4.8 Watts. Connect other decorative
lighting products of the same type end-to-end up to a maximum of 216 Watts total.
4)
CAUTION:
Do not install on trees having needles, leaves or branch coverings of metal or
materials which look like metal, and
5)
CAUTION:
Do not mount or support wires in a manner that can cut or damage wire insulation.
6)
CAUTION:
Risk of fire. This product does not contain lamp shunts, which allow the product to
operate if one lamp burns out. Replace lamps only with the spare lamps provided with this product.
7)
CAUTION:
To reduce the risk of overheating, replace burned-out lamps promptly. Use 3.0/2.0
Volt, 20 mA lamps only. The LED lamp has polarity. Do not deliberately change the direction of the LED lamp
in the lamp holder.
120V, 60Hz, 0.04 A, 4.8 W. 09/2018
FOR INDOOR AND OUTDOOR USE
UL MODEL NO.: LED-70L/2WB-1
Made in China
Imported by Golden Viking Sports, LLC. Sumner, WA USA 98390.
