6. Allow branches to fall into place or gently pull up and out. When adjusting branches, be sure that all wires are free of branch hinges.
7. Insert green-labelled plug into the wall outlet.
(See Fig. B.)
Your entire tree should now be lit. If some bulbs flicker or do not light,
search for any loose plugs and/or broken, loose or missing bulbs. Connect the plugs or replace the bad bulbs promptly in order to
maintain the performance and life expectancy of your pre-lit tree.
8. Begin to shape the branches and tips, working from the bottom to the top. Start with tips farthest from the pole and fan out one to
the right, one to the left and one at the centre of the main stem.
(See Fig. C.)
9. After shaping the entire tree following the previous step, slightly upsweep all branch tips for a uniform look. Shift branches to fill any
gaps. Your pre-lit tree is now complete and ready to be decorated.
Top view
Side view
Fig. C
1. This product is powered by a lithium battery. Due to their small size, lithium batteries can easily be swallowed by children.
Ingestion of such batteries has been known to cause death.
2. Do not expose light set to moisture.
3. Remove batteries when unit will not be used for an extended period of time, or when depleted.
4. Dispose of used batteries properly by following directions on batteries.
5. Use only CR2032 batteries for the remote controller.
6. Clean the battery contacts prior to battery installation.
7. DO NOT DISPOSE OF BATTERIES IN FIRE. BATTERIES MAY EXPLODE OR LEAK.
8. Battery must be recycled or disposed of properly. Dispose of as per the requirements of your local municipality.
WARNING
BATTERY REPLACEMENT
1. Remove the insulation tab.
2. Loosen the screw of the battery cover with a screwdriver (not included).
3. Replace the used battery with a new CR2032 button cell battery (not included). Make sure that
the battery is installed with the correct polarity (+ and -).
4. Retighten the screw to close and secure the battery cover.
Press the selector button on the Dual-colour Light Controller or
Remote Controller to select among:
(1) WARM WHITE - MULTI COLOUR: FADING (2) WARM WHITE: FADING
(3) WARM WHITE - MULTI COLOUR: ALTERNATING (4) WARM WHITE: STEADY
(5) WARM WHITE - MULTI COLOUR: SLOW FADING (6) MULTI COLOUR: STEADY
(7) MULTI COLOUR: FADING (8) COMBINATION
HOW TO USE THE DUAL-COLOUR LIGHT CONTROLLER AND REMOTE CONTROL:
Selector Button
Remote
Control
Light
Controller
Cover
Battery
CR2032
Insulation Tab
