3
product. Replace the fuse as per the User Servicing Instructions (follow product marking for proper fuse rating) and
check the product. If the replacement fuse blows, a short-circuit may be present and the product should be discarded.
m) Do not cover the product with cloth, paper or any material not part of the product when in use.
n) This product has a polarized plug (one blade is wider than the other) as a feature to reduce the risk of electric shock. This
plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit,
contact a qualified electrician. Do not use with an extension cord unless plug can be fully inserted. Do not alter or replace
the plug.
o) This product is equipped with push-in type bulbs. Do not twist bulb.
p) Read and follow all instructions that are on the product or provided with the product.
q) SAVE THESE INSTRUCTIONS
USE AND CARE INSTRUCTIONS
a) Before using or reusing, inspect product carefully. Discard any products that have cut, damaged, or frayed wire insulation
or cords, cracks in the lamp holders or enclosures, loose connections, or exposed copper wire.
b) When storing the product, carefully remove the product from wherever it is placed to avoid any undue strain or stress on
the product conductors, connections, and wires.
c) When not in use, store neatly in a cool, dry location protected from sunlight.
USER SERVICING INSTRUCTIONS
FUSE REPLACEMENT:
A) Extension cord fuse replacement (1 replaceable 5 A, 125 V fuse is located in the
plug):
1. Grasp plug and remove from its power source.
2. Locate blown fuse by sliding access cover on top of plug towards prongs.
3.
Remove blown fuse by turning the plug over. Fuses should fall into your hand
(gentle tapping may be required).
4. Locate spare replacement fuse included in plug.
5. Insert spare replacement fuse. Close fuse cover by sliding fuse access cover towards the cord.
CAUTION: To reduce risk of fire, replace fuse in extension cord with only 5 A, 125 V fuse. Do not replace attachment
plug. Discard product if the attachment plug is damaged.
BULB REPLACEMENT:
1. Grasp plug and remove from its power source.
2. Unlock the lamp lock on the socket of the bulb.
3. Pull bulb AND plastic base straight out of socket. Do not twist bulbs while you are removing them.
4. Replace burnt out bulb with a 2.5 V, 0.425 W bulb ONLY. (Additional bulbs are included for your convenience.)
5. Relock the lamp lock on the socket of the bulb.
If the new lamp base does not fit in lamp
holder, follow these steps:
l
Remove the base of burned out bulb by straightening lamp leads, and gently pull bulb out.
l
Thread leads of new bulb through holes in old base with one lead in each hole.
l
After bulb is fully inserted into base, bend each lead up so that the leads will touch the
contacts inside the lamp
holder.
STORAGE: Disassembled tree can be stored in its original box. Store tree in a cool dry place where the temperature does
not exceed 100 °F (38
°
C).
Helene Roulston 2013-3-11 10:54 PM
Deleted:
