Warning: To risk of personalinjury, do not bend the blade
arms (also referred to as flanges),
the brackets,balancing the blades or
or cleaning the fan. Do not insert foreign objects between rotating fan blades.
Warning: To reduce the risk of fire, electric shock or personal injury, mount fan to oulet box marked”acceptable for fan support” with
the screws provided with the outlet box.
Safety Rules – Read and Save These Instructions
1. To reduce the risk of electric shock, ensure electricity has been t
fuse box before beginning.
2. All wiring must be in accordance with the national and local electrical codes. Electrical installation should be performed by a
qualified licensed electrician.
3.
4. Do not install this fan with variable speed wall control or wall-mounted dimmer switch. It will permanently damage the fan’s remote
control receiver and cause the fan’s functions to fail.
WARNING:
To reduce the risk of electric shock or fire, do not use this fan with any solid-state fan-speed control device. It will
permanently damage the electronic circuitry.
5.
CAUTION:
To reduce the risk of personal injury, use only the screws provided with the outlet box.
6. The outlet box and support structure must be securely mounted and capable of reliably supporting a minimum of 35 lb (15.9 kg).
Use only UL listed outlet boxes marked “FOR FAN SUPPORT.”
7. The fan must be mounted with a minimum of 7' (2.13 m) from the trailing edge of the blades to the floor.
8. Avoid placing objects in the path of the blades.
9. To avoid personal injury or damage to the fan and other items be cautious when working around or cleaning the fan.
10. Do not use water or detergents when cleaning the fan or fan blades. A dry dust cloth will be suitable for most cleaning.
11. After making electrical connections, spliced conductors should
be turned upward and pushed carefully up into the outlet box. The
wires should be spread apart with the grounded conductor and the equipment-grounding conductor on one side of the outlet box
and the ungrounded conductor on the other side of the outlet box.
12. All set screws must be checked and retightened where necessar
13. This product is suitable for installation in damp locations.
y before installation.
Warning: To reduce the risk of fire, electric shock, or personal injury, mount to outlet box marked "acceptable for fan support of 35 lb
(15.9 kg) or less" and use mounting screws provided with the outlet box. Most outlet boxes commonly used for the support of light
fixtures are not acceptable
for
fan support and may need to be replaced Due to the complexity of the installation of this fan, a
qualified licensed electrician is strongly recommended.
!
!
!
IMPORTANT: RETAIN FOR FUTURE REFERENCE, AND READ CAREFULLY
Toll Free 1-866-827-4985 model no. 052-8399-0
ON
ON / OFF switch
NO Variable speed wall control
NO Dimmer switch
