3
Parts Pack Containing:
2 wood screws with flat washers
2 5/32" screws with lock washers
3 4x10 screws
4 blade screws
1 “J” hook
This manual is designed to make it as easy as possible for you to assemble, install, operate and maintain
the ceiling fan. The following tools listed are required for assembly and installation:
TOOLS REQUIRED FOR ASSEMBLY
1 x star-head screwdriver
1 x flat screwdriver
1 x wrench
1 x stepladder
1 x wire stripper/pliers
1 x electrical tape
After opening the package you should find all the necessary parts for installing this ceiling fan.
The box should also contain:
1 zip tie
3 balance pieces
1 balancing clip
1 instruction sheet
1
2
3
ASSEMBLY
Preparing for installation
Getting ready
· Unpack and inspect carefully to make sure all parts are
included and not damaged (see Fig. 1). Lay all pieces out
on a working space.
possible electric shock (see Fig. 2).
Choosing a location for the ceiling fan
32" (81.3 cm) from adjacent walls or obstructions.
· Choose a location where there is a high enough ceiling clearance (at least 6' 11" (2.1 m) from the floor
to the ceiling fan’s lowest moving part).
· Ensure that the outlet box in the room’s ceiling can support the weight of the fan. Typically, if the
outlet box is marked “acceptable for fan support”, it can hold the fan securely.
Mounting option
Drop-mount (for normal ceilings)
· This method is preferred if the ceiling is sloped or vaulted, or if the ceiling
is extra high, requiring the need of a downrod (see Fig. 3).
Tools Required for Assembly
