Assembly
6
model no. 043-7364-0
(24" Tower Heater)
/043-7365-8
(30" Tower Heater)
| contact us: 1.866.827.4985
1. Unscrew three (3) locking screws from
the bottom of the heater body (Figure 1)
and save them.
3. Press two halves of the base, as in
Figure 3, to interlock them together.
(Figure 3)
2. Align two screw bosses and
boss holes on back of two
halves of base according to
Figure 2.
5. Secure the base to the heater body
with the locking screws from Figure 1.
Tighten the locking screws firmly with
a screw driver. (Figure 5)
4. Align power cord to the slot on
the top side of the base.
(Figure 4)
Figure 1
Figure 2
Figure 4
Figure 3
Figure 5
Screw Bosses
Boss Holes
