1
make sure the outputs are not activated
2
Put in
ON
the
DIPB 3
for
LIGHT 1
while put in
ON
the
DIPB 4
for
LIGHT 2
3
Activate the output
LIGHT 1
or
LIGHT 2
4
Press and release
BUTTON
P1
and while away the time in which the output should remain on.
5
Press and release
BUTTON
P1
6
If the procedure was successful,
the output will turn off automatically after the time stored.
It is important that the
DIPB 3 or 4
remain in the
ON position
7
6
Time memorization
Outputs
LIGHT 1
and
LIGHT 2
can be automatically deactivated. The time is between 6 secons up to 18 hours.
DIP B
1 2 3 4
1 2 3 4
1 2 3 4
1 2 3 4
7
Memorization of the twilight: LIGHT 1
The memorization of the twilight for LIGHT 1 is automatic. Follow the instructions for the installation:
obviously you have to connect a twilight in the terminal board no. 11-14
1
make sure the outputs are not activated
2
Put
DIPB 1
in
ON
3
Activate the output
LIGHT 1
4
Press button
P1
for the light value of output
LIGHT 1:
DIPB 3 OFF
for activate or
DIPB 3 ON
for deactivation
5
Twilight memorized
1 2 3 4
1 2 3 4
1 2 3 4
1 2 3 4
DIP B
P1
WARNING! during the memorization you need to put light in the
output LIGHT 1 where the sensor has to commute.
P1
