nologo ADR3000, Руководство пользователя

Страница: 10 / 25

09
Be sure to stop the engine before installing the product.
Remove all power to any areas where wires will be connected.
Install the product in a loca
ti on where the satellite signals are received.
Before permanently mounting the unit, ensure that the camera views meet your
requirements.
(ex: where the interior view is not hidden by the mirror inside your car)
The Unit must be installed on the mounted straight both horizontally and ver ti cally
Installa ti on
Cau ti on
Connect power to the unit once the IR light module has been connected.
Aim the IR light module towards the driver and passenger area.
Cau ti on
Installa ti on of the IR (Infra Red) light
Insert the IR light module’s
knob, on the rare face of
the body.
1
Connect the other side
of “Y” power cable to the
power connection port
of the attached IR light
module of the unit.
2
Installing the Unit
Insert the holder into the
moun
ti ng connec ti on.
1
Clean the mounting
surface and remove
the red film from tape
the mount, and press in
place the mount to the
windshield
ti ghtly.
2
C l e a n t h e m o u nt i n g
s u r fa c e a n d re m o ve
the red film from tape
the mount, and press in
place the mount to the
windshield
ti ghtly.
3