Ȳ
Do not attempt to replace any part of this device
Ȳ
All products have gone through a thorough quality
assurance inspection. If you find that your device is
excessively hot, is emitting odour, is deformed, abraded,
cut or is experiencing or demonstrating an abnormal
phenomenon, immediately stop all product use and contact
manufacturer.
Legal
This product is meant for use only in conjunction with the
appropriate device. Please consult your device packaging
to determine whether this product is compatible with your
particular device. Manufacturer is not responsible for any
damages to any device incurred through the use of
this product.
Manufacturer shall not in any way be liable to you or to any
third party for any damages you or any third party may suffer
as a result of use, intended or unintended, or misuse of this
product in conjunction with any device or accessory other than
the appropriate device for which this product is designed.
Manufacturer will not be responsible for any damages you or
any third party may suffer as a result of misuse of this product
as outlined above.
If you are responsible for product use with an unintended
device and damages result from such use, you agree to
indemnify Manufacturer for any resulting injuries to any
third party(ies).
Use of the Made for Apple badge means that an accessory has
been designed to connect specifically to the Apple product(s)
identified in the badge and has been certified by the developer
to meet Apple performance standards. Apple is not responsible
for the operation of this device or its compliance with safety
and regulatory standards.
Please note that the use of this accessory with an Apple product
may affect wireless performance.
Apple, iPhone, and Lightning are trademarks of Apple Inc.,
registered in the U.S. and other countries.
FCC Statement
DECLARATION OF CONFORMITY WITH FCC RULES FOR
ELECTROMAGNETIC COMPATIBILITY
We, Nolii Ltd of 151 Wardour St, Soho, London W1F 8WE,
declare under our sole responsibility that the products
M16.
C1.2Z, M16.C2.2Z, M16.C3.2Z
to which this declaration
relates, comply with Part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) this device may not
cause harmful interference, and (2) including interference that
may cause undesired operation.
Federal Communications Commission Notice
This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to Part 15
of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation.
This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or
television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct
the interference by one of the following measures:
Ȳ
Reorient or relocate the receiving antenna
Ȳ
Increase the distance between the equipment and
the receiver
Ȳ
Connect the equipment to an outlet on a circuit different
from that to which the receiver is connected
Ȳ
Consult the dealer or an experienced radio/TV technician
for help
FCC Caution:
Any changes or modifications not expressly
approved by the party responsible for compliance could void
the user’s authority to operate this equipment.
CE Declaration of Conformity
We, Nolii Ltd declare under our sole responsibility that the
product model
M16.C1.2Z, M16.C2.2Z, M16.C3.2Z,
to which
this declaration relates, is in conformity with EMC Directive
2014/30/EU, Low Voltage Directive 2014/35/EU & RoHS
Directive 2011/65/EU (Recast).
We further declare that the product meets the essential
requirement of the above Directives. The limits contained in
these articles are designed to provide reasonable protection
against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to
radio communications.
However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one of
the following measures:
