Nolangroup N-Com B601 X Series, Руководство пользователя, Страница: 21 / 28

21
14. N-COM INTERCOM
The N-Com B601 system allows communication with other N-Com systems, up to a maximum
distance of about 150 m (in open field, with no obstacles). The range of the communication varies
depending on the N-Com systems used.
Important: The procedure described below refers exclusively to the pairing up and operation between
the B601 and the “900” / “600” series N-Com systems.
To pair up to N-Com systems of a range other than the “900” / “600” series, please refer to the
procedure described in chapter 15 “Universal Intercom”.
N.B.: The range and quality of the communication may vary significantly depending on the presence
of obstacles, weather conditions, magnetic fields.
14.1. N-Com “900” / “600” Series Intercom pairing up
•
Make sure the systems are turned off.
•
Put the systems in “Configuration” mode: press the “n” key and keep it pressed for 4 seconds,
until you hear the voice announcement “
Configuration Menu”.
•
On both systems, press the “

” key until you reach the option “
Intercom pairing”.
•
On system A, press the key pertaining to the “pre-setting position” where you wish to save
system B.
Pairing up CHANNEL 1 Briefly press “n”.
Pairing up CHANNEL 2 Press the “n” key twice.
Pairing up CHANNEL 3 Press the “n” key three times.
The Intercom connection with the selected channel is automatically activated at the end of the pair up
procedure.
14.2. N-Com “900” / “600” Series Intercom function (one-to-one connection)
To establish an Intercom connection with one of the systems stored in memory, simply press the
command related to the channel where the system was saved.
Connection CHANNEL 1 Briefly press “n”.
Call CHANNEL 2 Press the “n” key twice.
Call CHANNEL 3 Press the “n” key three times.
Disconnection of active intercom Briefly press “n”.
N.B.: In case the pre-setting position is empty, or the system being called cannot be reached within
the maximum range or it is already engaged in a phone call, you will hear an error voice message.
N.B.: In case the Intercom connection system falls outside the range (Intercom connection
interrupted), the B601 system will automatically try to reconnect every 8 seconds. Double beeps will
be emitted until the Intercom connection is not restored.
If you do not want automatic reconnection, press the “n” key to stop the automatic reconnection
attempts.