13
5.
CONFIGURATION MENU
All Bluetooth pair ups and other adjustments are carried out in this mode.
To put the system in “Configuration mode” (starting from a switched off system) press the “
ON
” key
and keep it pressed for 4 seconds, until you hear the voice announcement “
Configuration
”.
Once in the “Configuration” menu, press the keys“
” and “
” to scroll through the various menu
items.
In the items marked with an “
*
”, it is possible to enable / disable the function or carry out the
commands by pressing the “
ON
” key to confirm.
The following items make up the “Configuration” menu:
A.
Mobile phone pairing
(chapter 6)
B.
Intercom pairing
(chapter 12)
C.
Universal Intercom
pairing
(chapter 13)
D.
Second mobile phone pairing
(chapter 8)
E.
Speed dial*
(chapter 7.1)
F.
Smart Navi System
(cap. 9)
G.
Delete all pairings*
In order to delete all Bluetooth pair ups stored in the device, press the key “
” or “
” until you
hear the voice announcement “
Delete all pairings
”.
Press the “
ON
” confirmation key to delete all Bluetooth devices stored in memory.
H.
Reset
*
In order to restore the factory settings of the device, press the key “
” or “
” until you hear the
voice message “
Reset
”.
Press the “
ON
” confirmation key to restore all the factory settings of the device.
I.
Exiting the configuration*
To exit the “Configuration” menu, press the key “
” or “
” until you hear the voice
announcement “
Exit the configuration
”.
Press the “
ON
” confirmation key to exit the “Configuration” menu.
If no key is pressed within 10 seconds, the device automatically exits the “Configuration” menu.
6.
PAIRING UP WITH MOBILE PHONES OR OTHER BLUETOOTH DEVICES
Make sure the B601 is turned off.
Put the system in the “Configuration” mode, then press the “
ON
” key and keep it pressed for 4
seconds, until you hear the voice announcement “
Configuration
”.
Press the key “
” to access the “Mobile phone pair up mode”.
Turn on the search for Bluetooth devices (smartphone, GPS, MP3 reader) on the device.
Select the N-Com device. If a password is requested, enter 0000 (four zeros).
Connection between the two devices is established after a few seconds.
Note
: The affiliation is stored in the helmet and in the cell phone and it is not lost when the two
devices are turned off. As a result it needs to be carried out only once.
Automatic Connection
Once the Bluetooth device has been paired up, connection is automatic
when the system is turned on.
Manual Connection
In case connection is not automatically initiated after a few seconds, you
can connect from the Bluetooth device or by pressing “
ON
” and keep it
pressed for about 2 seconds.
