Kebne 1
p.4/7
Kebne 1 product number Ö72-10
Head office
:
Nola Industrier AB Box 17701 Repslagargatan 15b
118 93 Stockholm Tel: 08 702 1960 Fax: 08 702 1962 headoffice®nola.se
Customer services/showroom/export/press
:
Skeppsbron 3 211 20 Malmö
T: 040171 190 Orderfax: 040 127 545 [email protected]
www.nola.se
ASSEMBLY INSTRUCTIONS
ASSEMBLY
Install the two end panels BCDF & BCEF using
connecting fitting X. See the principle for
mounting.
Screw on connecting fittings (without tightening
them) in all openings on A and G respectively
Assemble both ends with A and G at the same
time.
Tighten all screws according to the following
principle.
PRINCIPLE FOR ASSEMBLY
1. A connecting fitting (X)
and
two
stop
screws
M10x30 are needed for
each join.
PLEASE NOTE! THE
SCREWS MUST BE
LUBRICATED!
2. Screw the connecting
fittings into one part
without tightening the
screw.
3. Join the parts and
screw in the other
screw.
4. Ensure that the two
parts are lined up and
then tighten the screws
alternately until the
screw head is in line
with the outer tube. Be
careful not to pull so
hard that the outer tube
is deformed.
A
1.
C
2.
D
B
B
3.
4.
F
E
C
G
F
X