background image

Battery

To open the battery compartment, place your thumb on the recess, press down 
and slide forward.

Insert the supplied 9V battery paying attention to the plus (+) and minus (-) poles. 
If the battery is inserted in the wrong direction, the battery cover will not close.

Low Battery Life Alert

When the battery is low, the yellow LED will blink continuously and the device will provide 
a warning audio every 5 minutes. The device will continue working until the battery dies.

When the battery is depleted further, the device will emit a continuous warning audio and 
the green LED will blink. As the device will no longer detect metals, the battery should be 
recharged or replaced.

Turning On the Device

Before turning on the device, hold the device away from metallic objects 
including your watch and jewelry. Turn on the device by sliding the switch to 
either audio or vibration alert.

When the device is turned on a long beep will be heard and the green LED will 
illuminate. On initial start up, the red LEDs will light up indicating battery life 
status and then go off. During use, the red LEDs will indicate the signal and 
sensitivity level.

Volume Control 

(Th�s feature �s not present �n the Bas�c model)

The device has 2 levels of volume. For higher 
volume, press and hold  button 1 and press button 
3 at the same time. For lower volume, press and 
hold button 1 and press button 2 at the same time. 
The volume control does affect the earphone audio. 

Earphone/Charger Jack 

(Th�s feature �s not present �n the Bas�c model)

For a silent operation or to use the device more conveniently in noisy 
environments, insert the optional earphone jack here.

Important:

 The optional earphone is ''MONO''. Using ''STEREO'' earphones may 

harm the device.
You can charge the rechargeable 9V battery on the device by inserting the 
charger plug into the Earphone/Charger jack. When charging starts, the Low 
Battery LED (yellow) will light up. As the battery starts filling up, the 
Signal/Battery Level LEDs will start lighting in order and when the charging is 
complete they will all start blinking indicating full charge.

Important:

 Trying to charge regular, non-rechargeable batteries may harm your 

device.

OPERATING INSTRUCTIONS

3

2

1

NOKTA DETECTORS

Содержание Ultra Scanner









Отзывы: