Nokta MAKRO NMS20, Руководство пользователя

Страница: 11 / 16

Metal Detection
When the device detects a metal target, the LED Alarm Indicator will light up as follows in proportion
to the size and proximity of the target:
When metal is detected, if the audio alarm is active, the device will emit an audio warning. The tone of
the audio alarm is proportional to the size (small/medium/large) or the proximity of the metal target.
NOTE:
In the NMS20R and NMS30R models that have radiation detection, when Beta ve Gamma
radiation is detected, beeps will be emitted in frequency that is proportional to the amount of radiation
and the blue LEDs will flash on the LED Alarm Indicator.
All 3 LEDs are off:
No metal target
7
DEVICE OPERATION
Scanning
Scan the person's body by holding the device close to the area being scanned.
WARNING! When scanning areas closer to the ground, to eliminate the detection of rebar, keeping the
rebar elimination button held down, hold the detector as shown in the picture and scan vertically.
1 Green LED:
Small metal
1 Green LED
+ 1 Yellow LED:
Medium-sized metal
1 Green LED
+ 1 Yellow LED
+ 1 Red LED:
Large metal
3 Red LEDs:
Very Large Metal
Blue LED(s):
Please read the note
section below!