Table 5-5, “XS-2426G-B indoor ONT physical connections” (p. 52)
describes the physical
connections for XS-2426G-B indoor ONTs.
Table 5-5
XS-2426G-B indoor ONT physical connections
Connection
Print Letters
Description
POTS port
TEL1 and TEL2
This connection is provided through an RJ-11 port. One POTS connection is supported.The
POTS port supports voice services.
Ethernet ports
LAN1 to LAN4
This connection is provided through Ethernet RJ-45 connectors. Up to four 1000/100/10
Base-T Ethernet interfaces are supported. The Ethernet ports can support both data and
in-band video services on all four interfaces.
Power input
POWER
This connection is provided through the power connector. A power cable fitted with a barrel
connector is used to make the connection.
Reset button
RESET
Pressing the Reset button for less than 10 seconds reboots the ONT; pressing the Reset
button for 10 seconds resets the ONT to the factory defaults, except for the LOID and SLID.
WLAN button
WLAN
Wi-Fi service is compliant with IEEE 802.11 standards and is enabled and disabled using the
WLAN button.
WPS button
WPS
The Wi-Fi Protected Setup (WPS) button enables and disables the WPS.
LED button
LED
The LED button turns the LED indicators on or off.
On/Off button
ON/OFF
This button turns the ONT on or off.
Figure 5-2
XS-2426G-B indoor ONT physical connections (back)
36736
WP
S
WLA
N
ON/OF
F
POW
ER
USB
LAN1
LAN2
LAN3
LAN4
TEL2
Ethernet
ports (4)
(RJ-45)
Wi-Fi
security/
on/off buttons
On/off
button
Power
USB
POTS
ports (2)
(RJ-11)
XS-2426G-B unit data sheet
XS-2426G-B interfaces and interface capacity
Nokia ONT
Review
Review
© 2021 Nokia. Nokia Confidential Information
Use subject to agreed restrictions on disclosure and use.
3FE-49546-AAAA-TCZZA
December 2021
52
Issue 1