RM-801; RM-819(Nokia Lumia 800)
Service Tools and Service Concepts
Issue 1
COMPANY CONFIDENTIAL
Page 2-7
Copyright © 2011 Nokia. All rights reserved.
MJ-305
Module Jig
0781487
Module jig MJ-305 is designed for regional central services for engine testing;
It can be used for flashing via USB and RF, battery and system testing.
The main functions are:
Powering with external power
CU-4 interface adapter to phone
WLAN/BT/GPS RF-interface with probes
GSM/WCDMA RF-interfaces with probes
BSI mode selector(Tabby and Lynx interface, selected with battery cable)
VBAT interface (Tabby and Lynx interface, selected with battery cable)
SS-272 RF guide plate is required with this jig
CA-158RS cable is used together with this jig for RF testing
VBAT functions can be performed in the CU-4. Calibration voltages and currents
e.g. are protected and monitored by the CU-4 interface software (protection
for over-current, overvoltage and reverse voltage).
VBAT can be powered through MJ-305 with external power. MJ-305 provides
the VBATT with SMPS regulation to 3.9V/2A and regulation bypass with
overvoltage protection (trip point ~4.4VDC). The VBATT external supply is
provided with overvoltage protection (trip point ~16.5VDC), polarity protection
and over-current protection (fuse 2.5A slow).
SS-280
RF guide plate
0781516
SS-280 is an RF guide plate used with MJ-305 module jig
Spare Display Extend Flex 0781515
Display extend flex is a flex cable to assist with board level troubleshooting,
connecting the Display Assembly with the PWB.