Figure 4-1, “Sample safety label on the ONT equipment” (p. 32)
shows a sample safety label on
the ONT equipment.
4.2
Safety standards compliance
This section describes the ONT compliance with North American safety standards.
WARNING
Equipment Damage
Changes or modifications to this unit not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
4.2.1
EMC, EMI, and ESD standards compliance
The ONT equipment complies with the following requirements:
•
Federal Communications Commission (FCC) CFR 47, Part 15, Subpart B, Class A requirements
for OLT equipment
•
GR-1089-CORE requirements, including:
− Section 3 Electromagnetic Interference, Emissions Radiated and Conducted
− Section 3 Immunity, Radiated and Conducted
− Section 2 ESD Discharge Immunity: System Level Electrostatic Discharge and EFT Immunity:
Electrically Fast Transients
Figure 4-1
Sample safety label on the ONT equipment
18533
This device complies with Part 15 of the FCC Rules. Operation is subject
to the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
This Class A digital apparatus complies with Canadian ICES-003. Cet appareil
numerique de la class A est conforme a la norme NMB-003 du Canada
Tested to Comply
with FCC Standards
FOR HOME OR OFFICE USE
COMMUNICATION SERVICE EQUIPMENT
US LISTED
27FY
Type 3R Enclosure - Rainproof
CAUTION
This Assembly Contains Electrostatic Sensitive Devices
c
®
ANSI ONT safety guidelines
Safety standards compliance
Nokia ONT
Draft
Draft
December 2020
Issue 1
33
Nokia – Proprietary and Confidential
Use pursuant to applicable agreements
3FE-49348-AAAA-TCZZA