Output device
Output terminals
Output voltage (mVrms)
Headphone right
X4100 pin 4 and gnd
~43mVrms
Speaker left
L4103 and L4104 pads
~300mVrms
Speaker right
L4101 and L4102 pads
~300mVrms
Internal microphone can be tested by subjective testing. When using internal mic to headphone out loop
connect known working headset (Nokia HS-48) to the device and test if you can hear the sound through the
headsets.
External microphone is tested by feeding test signal to the X4100’s pin 3 and gnd.
In this case use input signal presented a table below and check also supposed output.
Fastest and easiest way to test external microphone functionality is to insert known working (HS-48) headset
to the audio connector, enable Ext microphone in Ext earpiece out test audio loop by the Phoenix and just
speak and listen.
Note:
Before testing any microphone path test the headphone output functionality as described on
previous page.
Input terminals
Output terminals
Input signal
Output signa
X4100 pin 3 and gnd
X4100 pin 5 and gnd or X4100
pin 4 and gnd
Sine 1kHz/10mVrms
Sine 1kHz/
~65mVrms (without
load)
RX-44
BB Troubleshooting and Manual Tuning Guide
Issue 1
COMPANY CONFIDENTIAL
Page 4 –49
Copyright © 2007 Nokia. All rights reserved.
