Nokia NEM-4 Series Скачать руководство пользователя страница 7

Страница: 7 / 8

CCS Technical Documentation

5 - Disassembly Instructions

Company Confidential

NEM-4

Issue 1 09/2003



2003 Nokia Corporation.

Page 5-7

Company Confidential

NEM-4 Dome Sheet Exchange

Put the PWB Module into the Soldering Jig.

Use the SRT-6 to remove the faulty Dome Sheet. Place it
under the Dome Sheet as shown in the picture and lift it
up carefully from PWB Module.

Take care about components on the PWB Module during
removal of the Dome Sheet.

Use the same procedure also for the Dome Sheet Left.

Clean the pads on the PWB Module with a clean cloth if
necessary. Be carefully not damage the components on
the PWB.

Put the new Dome Sheet onto the Dome Sheet
Assembly Jig. Mind the guiding pins.

Содержание NEM-4 Series

Страница 2: ...assembly Instructions CCS Technical Documentation Page 5 2 Copyright 2003 Nokia Corporation Issue 1 09 2003 Company Confidential Table of Contents Page No Disassembly instructions 3 Assembly instructions 6 NEM 4 Dome Sheet Exchange 7 ...

Страница 4: ... Confidential Always protect LCD with protection foil to avoid dust and scratches Take Engine from Chassis Remove Mono Jack from Chassis Remove Stereo Jack from Chassis Remove DC Connector from Chassis with Torx Put Torx under the DC Connector 1 and bend 2 Remove Microphone from Chassis with Torx Put Torx hole behind Microphone and push carefully ...

Страница 6: ...ntial Assembly instructions Remove Domesheet with Tweezers from PWB Engine Remove Domesheet with Tweezers from PWB Engine Note The silicon gasket may stick in the PWB Damaged and loose silicon gasket must be replaced with a spare part gasket Replace damaged or loose silicon gasket with a spare part gasket Fix the gasket carefully with tweezers in chassis ...