![Nokia N91-2 Скачать руководство пользователя страница 112](http://html.mh-extra.com/html/nokia/n91-2/n91-2_user-manual_1699274112.webp)
Tools
100
Copyright © 2006 Nokia. All rights reserved.
Reject call with SMS
—Select
Yes
to send a text message
to a caller informing why you could not answer the call.
See “
Answer or reject a call
”, p.
27
.
Message text
—Write a text to be sent in a text message
when you reject a call.
Automatic redial
—Select
On
, and your device makes a
maximum of ten attempts to connect the call after an
unsuccessful call attempt. To stop automatic redialling,
press .
Summary after call
—Activate this setting if you want the
device to briefly display the approximate duration of the
last call.
Speed dialling
—Select
On
, and the numbers assigned to
the speed dialing keys (
-
) can be dialed by pressing
and holding the key. See also “
Speed dial a phone number
”,
p.
26
.
Anykey answer
—Select
On
, and you can answer an
incoming call by briefly pressing any key under the slide
cover.
Line in use
(network service)—This setting is shown only if
the SIM card supports two subscriber numbers, that is,
two phone lines. Select which phone line you want to use
for making calls and sending text messages. Calls on both
lines can be answered irrespective of the selected line.
If you select
Line 2
and have not subscribed to this
network service, you will not be able to make calls. When
line 2 is selected,
is shown in the standby mode.
Tip!
To switch between the phone lines, press and
hold
in the standby mode.
Line change
(network service)—To prevent line selection,
select
Line change
>
Disable
if supported by your SIM
card. To change this setting, you need the PIN2 code.
Connection
Data connections and access points
Your device supports packet data connections (
), such as
GPRS in the GSM network.
Glossary:
General packet radio service (GPRS) uses
packet data technology where information is sent in
short packets of data over the mobile network.
To establish a data connection, an access point is required.
You can define different kinds of access points, such as:
• MMS access point to send and receive multimedia
messages
• Access point for the Web application to view WML or
XHTML pages
• Internet access point (IAP) to send and receive e-mail
Содержание N91-2
Страница 1: ...User s Guide for Nokia N91 2 ...