manualshive.com logo in svg

Nokia MetroSite, Руководство по обслуживанию

Поделиться
Скачать
Nokia MetroSite Скачать руководство пользователя страница 17

Periodic maintenance

DN9913495

© Nokia Corporation

Draft

17 (52)

Issue 3-0 en

Nokia Proprietary and Confidential

Caution

Caution

3

Periodic maintenance

This chapter describes the periodic maintenance of the MetroSite EDGE Base
Station.

3.1

Maintaining the cabinet

This section describes the cabinet maintenance measures.

3.1.1

Fan unit and air circulation

The fan unit must be cleaned of leaves and debris whenever necessary. To
maintain proper circulation of air through the cabinet, air inlets and outlets must
not be obstructed.

3.1.2

Cover

Clean the BTS cover of stains and dust whenever necessary. Wipe the surface of
the cover with a piece of cloth moistened with water and a washing agent.

Do not use any washing agents that contain alkalis, esters, ketones, or aromatic,
chlorinated, or fluorinated hydrocarbons, since these may damage the cover.
Washing agents containing these chemicals can only be used if approved by the
manufacturer for cleaning polycarbonate objects.

Do not spill any water or chemicals inside the cover.

All manuals and user guides at all-guides.com

Содержание MetroSite





















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды