Nokia Mediamaster 230 S Скачать руководство пользователя страница 33 | Manualshive

Страница: 33 / 40

Nokia Mediamaster 230 S Скачать руководство пользователя страница 33

GB 33

Viewing Mode

General information

The following describes the basic functions of your Mediamaster
that can be used while watching satellite TV or listening to sat-
ellite radio.

Some of the functions described here are dependent on the
Service Provider and can only be used if they are included
in the transmitted programme information.

Please note

that during the Channel Search procedure, the

Mediamaster may download a large number of channels. This
may include channels from various Service Providers, including
those to which you do not have access unless you have a smart
card from one of those Service Providers.

If you select a programme to which you do not have access, you
will see a message on the screen. This message may vary de-
pending on the Service Provider and the smart card/CA Module
that you are using.

In addition to the normal functions such as switching the Media-
master in/out of standby mode, changing the volume etc., there
are other useful functions which will be explained in this part of
the manual.

You can always exit a menu at any time, without affecting any
settings, by pressing

back

.

If you are listening to a radio station and do not press any but-
tons on the remote control, the picture fades after 2 minutes.

Programme information

Every time you change channels, you will receive programme in-
formation for a few seconds. (In the “User preferences” menu
of the Control folder, you can select the time period during which
this information is shown.)

The information may include:
The current time.
A channel list.
The channel number and name.
The names of the current and next programmes.
The start and stop times of the current programme.
A bar indicating the elapsed time of the current programme.
The start and stop times of the next programme.

Programme information will only be available if it is included
in the transmission. Otherwise a message stating “No infor-
mation available” will be shown.

Information about
the next programme

Information
about the
current pro-
gramme

Channel list

Current
time

Channel
number and
name

«
...
31
32
33
34
35
...
»

Содержание Mediamaster 230 S









































Отзывы:

Нет отзывов