background image

GB 30

PCR

Program Clock Reference.

PID

Packet Identifier.

PIN code

Personal Identification Number.  A four-digit code stored in the
smart card. For PPV (Pay Per View) or other services together with
the subscription.

RCA

Coaxial connector used to connect the Mediamaster to an exter-
nal amplifier.

RF

Radio frequency (known as HF in some countries).

RGB

Red, Green, Blue. Colour signals are routed in separate cables in
order to provide a high quality TV picture.

SERIAL RS 232

A serial communication standard data port.

SCART

A 21-pin connector used for connecting the Mediamaster,VCR  and
TV. Also named Euroconnector or Peritel connector.

Scrambled TV programme

Some TV programmes are transmitted in scrambled form.

Service provider

A company that collects a number of programmes/services and dis-
tributes them to customers.

S/PDIF

Sony/Philips digital interface format. Digital audio output.

Symbol rate

Speed of the digital transmission

SW

Software. Programme code.

TS

Transport stream.

VCR

Video Cassette Recorder.

AC-3

Multichannel digital audio encoding system.

Access

Authorisation to use the coding system to purchase / order TV pro-
grammes.

Access code

A four-digit code stored in the Mediamaster. Used to
lock/unlock the Mediamaster.

Access control

A feature that allows parents to ”lock” programmes that they con-
sider unsuitable for children. A ”locked” channel or programme can
only be ”unlocked” with the special access code.

AGC

Automatic Gain Control.

BER

Bit Error Rate. Signal quality measure.

C/N

Carrier to Noise. Signal quality measure

DVB

The Digital Video Broadcast  group was created to establish a tech-
nical framework for the introduction of digital video broadcasting
systems.

GHz

The prefix giga means milliard, and Hertz means cycles per second.
Signals in the GHz range are often called microwaves.

MHz

The prefix mega means million, and Hertz means cycles per sec-
ond.

MPEG

Moving Picture Experts Group. Established by the International
Standards Organisation to provide the basis for a picture coding and
compression system.

Network

A number of digital channels transmitted from one source.

PCM

Pulse Code Modulation. Non-compressed digital audio format.

GLOSSARY OF TERMS

Содержание Mediamaster 150T


































Отзывы: