Nokia IP390 - Security Appliance Скачать руководство пользователя | Manualshive

Страница: 32 / 97

background image

3

Performing the Initial Configuration

32

IP390 Security Platform Installation Guide

Note

The default interface speed for the IP390 is 1000 Mbps.

You can make VLAN, SNMP community string, and remote logging configuration choices at
this time, although you can change them later.

To perform the initial configuration
1.

Press the power switch to the “on” position to turn on power to the appliance.

The fans on the back of the appliance turn on when you press the power switch. Verify that
the fans are running after you press the switch.
Check the power LED on the front panel of the appliance (the Nokia logo) to ensure that the
power supply is operating correctly. The power LED should be illuminated. For more
information about the system status LEDs, see

“System Status LEDs”

on page 19.

If the power supply fans are not running, or if the power LED is not illuminated:

Check the power supply cord to make sure it is properly connected.

Make sure the power switch is on.

Make sure the chassis tray assembly is pushed all the way in from the front of the
appliance and that the front panel retaining screws are tightened.

Make sure that power is turned on to the power strip or wall receptacle you plugged the
appliance in to.

If the fans are still not running, or if the power LED does not illuminate, contact your Nokia
service provider as listed in

“Nokia Contact Information”

on page 3 for technical support.

2.

At the console a series of startup messages appears, then the console prompt appears.
The prompt remains on the screen for about five seconds. If you type any character during
this time, the appliance activates the Nokia IPSO boot manager.

BOOTMGR[0]>

Note

For information about using the boot manager, see the

Nokia IPSO Boot Manager

Reference Guide

.

After some miscellaneous output, the following prompt appears:

Hostname?

00527

Power switch

Cooling fans

«
...
30
31
32
33
34
...
»

Содержание IP390 - Security Appliance


































































































Отзывы:

Нет отзывов

Похожие инструкции для IP390 - Security Appliance

Бренд: D-Link Страницы: 2

Бренд: FabiaTech Страницы: 4

Бренд: Hama Страницы: 4

Бренд: Ubee Страницы: 9

F-ZTAT H8/3048 Series

Бренд: Renesas Страницы: 34

Бренд: Planet Страницы: 20

Wireless Mini PCI Module

Бренд: E-Tech Страницы: 42

Sentry Global Security Modem

Бренд: Server Technology Страницы: 22

Dimension ES-3124

Бренд: ZyXEL Communications Страницы: 228

InvenSense RoboKit1

Бренд: TDK Страницы: 13

Бренд: ActionTec Страницы: 115

Vortex86SX VSX-6100

Бренд: ICOP Technology Страницы: 50

Бренд: Technics Страницы: 20

Бренд: Accusys Страницы: 34

Бренд: 8e6 Technologies Страницы: 94

Бренд: InHand Страницы: 69

Бренд: Netopia Страницы: 138

Бренд: Primera Страницы: 82

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды