U s i n g t h e m e n u
19
3. Press ##left or ##right in the command zone until the mode you
want is highlighted.
4. Press ##middle to select the mode.
2. Insert the first character:
Press ##up to access the character zone and then press ##left or
##right until the correct character is highlighted. Press ##middle to
select it.
The selected character is added to the editor zone.
3. Repeat step 2 until you have inserted all the text you want.
4. To save the data, select
##Options
in the command zone, press
##middle, select
##Save
and press ##middle again.
To exit the editor without saving, select
##Back
in the command zone
and press ##middle. If there is no
##Back
command, select
##Options
, press ##middle, select
##Exit editor
and press ##middle
again.
hs-13w_en1_draft2.fm Page 19 Thursday, August 5, 2004 7:25 AM
