Table 3
Interfaces description (Cont.)
Interface
Connector type
Description
BH #2/LMT Management port
RJ45
Ethernet connection with the
core network or Pico Module
management
5V DC port
3.5 mm barrel connector
DC in power supply
GPS antenna port
SMA
GPS antenna signal receive
ANT1 and ANT2 antenna ports SMA
External antennas
(LTE/WCDMA) signal transmit
and receive
5.2 Reset button
The reset button is placed on the connection panel of the Flexi Zone Indoor Pico module.
There are two functions of the reset button:
•
A momentary push of the button will result in a hard reset of the device (similar to
power up restart)
•
Pressing and holding the button for more than 5 seconds will trigger the in factory
default reset
5.3 PoE-++ solution
Flexi Zone Indoor Pico modules support Power-over-Ethernet Evolution (PoE++)
technology to supply the unit with power. The PoE solution allows electrical power to
pass along with data on Ethernet cabling. It offers several benefits to the user, including:
•
Cost savings
- PoE-++ significantly reduces the number of electrical wiring and
outlets that have to be installed inside the building
•
Easy installation
- there is no need to search for a secure place to mount the
AC/DC adapter on a wall or a ceiling
•
Flexibility
- it is easy to relocate the Pico module in order to find an optimal RF and
WiFi reception
The PoE++ parameters are listed in the table
Table 4
PoE-++ specification
Parameter
Value(s)
Power sourcing equipment (PSE)
power
60 W
Power at powered device (PD)
51 W
Voltage range at PSE
50 - 57 VDC
Construction
Flexi Zone Indoor Pico BTS Product Description
12
DN09210454
Issue: 01
