Table 8
RRH external interfaces (Cont.)
Variant
PWR IN
ANT
Rx EXT
RET
EAC
OPT
LMP
FRHE
RRH 2x60
W/4x30 W
1700/2100 MHz
FRIG
3-pole screw
terminal
4x 7/16
female
2x QMA,
female
8-pin
circular
D-sub
MDR14
SFP
2x15 pin
header
w
NOTICE:
Risk of damage to equipment. Incorrect cables and seals may not
provide secured environmental protection. Use only tested IP65 class cables
with seals.
7.6 RRH antenna line device support
Table 9: RRH antenna line device support
shows how particular unit supports the
antenna line device.
AISG
Shows the supported version of the Antenna Interface
Standards Group (AISG) standard.
Leg.
Shows whether the legacy equipment from Siemens
(MHA/TMA) is supported.
CWA
Shows whether Current Window Alarm (CWA) for non-
AISG installations is supported.
Voltage
Shows the value of power supply voltage.
Power/port
Shows the value of voltage and power provided by the
antenna port and div port (if supported).
RET port
Shows whether the unit contains RET port.
Power
Shows the value of voltage and power provided by the
RET port.
Table 9
RRH antenna line device support
ALD support via antenna ports
RET port
AISG
Leg.
CWA
Voltage
Power/p
ort
RET port Power
RRH 2x20 W
850 MHz
FHCA
2.0
Main
only
No
No
14.5V
17W
Yes
17W
RRH 2x40 W
900 MHz
FHDA
2.0
Main+Div
No
No
14.5V
30W/port Yes
17W
Flexi Multiradio BTS Radio Module and Remote Radio
Head Description
RF Module and RRH interfaces
Issue: 05
DN0951745
39