Nokia E52 Скачать руководство пользователя страница 8

 

                                                                    E52

 

RM-469, RM-481

Service Manual Level 1&2

 

8

  

 

 

      CONFIDENTIAL 

    

6.

 

BATTERY INFORMATION 

Note: A new battery’s full performance is achieved only after two or three complete charge 
and discharge cycles! The battery can be charged and discharged hundreds of times but it will 
eventually wear out. 

When the operating time (talk-time and standby time) is noticeably shorter than normal, it is 
time to buy a new battery. Use only batteries approved by the phone manufacturer and 
recharge the battery only with the chargers approved by the manufacturer. 

Unplug the charger when not in use. Do not leave the battery connected to a charger for 
longer than a week, since overcharging may shorten its lifetime. 

If left unused a fully charged battery will discharge itself over time Temperature extremes can 
affect the ability of your battery to charge. 

For good operation times with Ni-Cd/NiMh batteries, discharge the battery from time to time 
by leaving the product switched on until it turns itself off (or by using the battery discharge 
facility of any approved accessory available for the product). 

Do not attempt to discharge the battery by any other means Use the battery only for its 
intended purpose. 

Never use any charger or battery which is damaged. 

Do not short-circuit the battery. Accidental short-circuiting can occur when a metallic object 
(coin, clip or pen) causes direct connection of the + and - terminals of the battery (metal strips 
on the battery) for example when you carry a spare battery in your pocket or purse. Short-
circuiting the terminals may damage the battery or the connecting object. 

Leaving the battery in hot or cold places, such as in a closed car in summer or winter 
conditions, will reduce the capacity and lifetime of the battery. Always try to keep the battery 
between 15°C and 25°C (59°F and 77°F). 

A phone with a hot or cold battery may temporarily not work, even when the battery is fully 
charged. Batteries’ performance is particularly limited in temperatures well below freezing. 

Do not dispose batteries in a fire! Dispose of batteries according to local regulations (e.g. 
recycling). 

Do not dispose as household waste. 

 

Issue 1 

 

         

Copyright © 2008 NOKIA. All rights reserved. 

Содержание E52



























Отзывы: