64/113
<format>:
2 numeric
<oper>
<oper>:
the numeric format is the GSM Location Area Identification number (refer GSM
04.08 10.5.1.3) which consists of a three BCD digit country code coded as in
ITU-T E.212 Annex A, plus a two BCD digit network code, which is
administration specific; returned <oper> shall not be in Binary Coded Decimal
(BCD) format, but in IRA characters converted from BCD; hence the number
has structure: (country code digit 3)(country code digit 2)(country code digit
1)(network code digit 2)(network code digit 1)
<stat>:
0 unknown
1 available
2 current
3 forbidden
9.1.3 +CLCK Facility lock
Command
Response
Default
+cme
error
execute
+CLCK=<fac>,<mode>,
<passwd>,<class>
when
<mode>
=2:
+CLCK: <status>[,<class1>
[<CR><LF>+CLCK: <status>,<class2>
[...]]]
[,,,7]
x
test
+CLCK=?
+CLCK: ("PS","SC","AO","OI","OX","AI",
"IR","AB","AG","AC")
Optional. 07.07 section 7.4. Enables/disables or queries the state of SIM/ME security
features (PIN/security code query or fixed dialling feature) or call barring supplementary
services.
<fac>
values “AB”, “AG” and “AC” are only applicable for
<mode>
=0. Only security
code levels ‘phone’ and ‘none’ can be handled with this command. If ‘memory’ level is set
and status is queried (
+CLCK="PS",2
), AT interface shall indicate ‘not active’ (
+CLCK: 0
).
When SS status request response from network indicates that SS is active for specific data
bearer services (e.g. ‘circuit async’), AT interface shall only indicate ‘data’ (
<class>
=32)
(‘not active’ case is displayed only when SS is not active to any service; i.e.
+CLCK: 0,7
).
Supported <class> values: 1, 2, 4, 5, 7, 8, 12, 13, 15, 16, 32, 64, 128, 144, 160, 240, 242
and 255.
9.1.4 +CPWD Change password
Command
Response
+cme
error
execute
+CPWD=<fac>,<oldpwd>,<newpwd>
x
test
+CPWD=?
+CPWD:
("PS",10),("SC",8),("AB",4),("P2",8)
Optional. 07.07 section 7.5. Changes passwords of SIM/ME/network features. “AB” =
network/barring password.
