Nokia Communicator 9290, Руководство пользователя

Страница: 86 / 344

68
Phone
IMPORTANT: The default lock code is 12345 . For security reasons, it is imperative
that you change the lock code. Keep the code secret and in a safe
place, separate from the communicator. For information on
changing the lock code, see section ‘Security’ on page 230.
Restore factory settings (3-4)
You can reset some of the menu settings to their original values. You need the lock
code for this function. This function will not affect stored phone numbers and names,
access codes, earpiece volume setting, call timers, cost counters, selected application
tones or SMS messages.
Forwarding (Menu 4)
Tip: The icon is
shown in the stand-by mode
when you have activated the
Forward all voice calls .
This system service allows you to direct your incoming voice calls to another phone
number when you do not want to be disturbed, or when the phone is switched off
or outside the system coverage area. For details, see ‘Forward voice calls’ on
page 105.
The options are: Forward all voice calls / Forward if busy / Forward if not answered / Forward
if out of reach / Forward if not available / Forward all fax calls / Forward all data calls / Cancel
all forwards .
Select Activate to set the forward setting on if allowed by the system, Cancel to set
the setting off. Select Check status to check whether the forward is activated or not.
If you select Forward if not answered or Forward if not available , you can also select
Set delay to choose a delay time before the call is forwarded. The options are 5 sec /
10 sec / 15 sec / 20 sec / 25 sec / 30 sec .