5
English
Copyright © 2009 Nokia. All rights reserved.
You can select if the car kit
amplifier is used for calls and the
car radio amplifier is used for
music, or if the car kit amplifier is
used for both.
If you want to use the loudspeaker
SP-3 for calls, use the power cable
PCU-4 or CA-153P instead of the
ISO cable. For instructions, see the
user and installation guide on the
CD.
You can connect the car kit to a
loudspeaker with an impedance of
at least 2 ohms. The optimal
impedance is 4 ohms.
For the latest and detailed
installation instructions, go to
www.nokia.com/support or your
local Nokia website.
Use the car kit amplifier for
calls and music
Make the connections as shown in
figure 1 to use the built-in
amplifier of the car kit for calls
and music played on a device that
supports the A2DP Bluetooth
profile.
After you have connected the ISO
cable, connect the input device
CU-11 and the microphone MP-2
to the hands-free unit.
Use the car kit amplifier for
calls and the car radio
amplifier for music
Make the connections as shown in
figure 2 to use the amplifier and
equaliser of your car radio for
music played on a device that
supports the A2DP Bluetooth
profile. The built-in amplifier of
the car kit is used for calls.
Nokia_CK100_APAC_UG_en.fm Page 5 Tuesday, December 8, 2009 2:45 PM
