manualshive.com logo in svg
background image

1

Introduction

This installation guide has been prepared to provide the 
basic information necessary to install this car kit. This guide 
is not intended to be definitive, because different types and 
models of vehicles will require different installation work. 
The information given is for general guidance only.

The terms of warranty demand that this car kit be installed by 
an experienced installation facility. An end user should never 
attempt to install this car kit without professional assistance 
as the installation requires special tools and knowledge.

Please refer to the phone’s Owner’s Manual for instructions 
on the phone’s operation, care and maintenance, including 
important safety information.

Note:

 Read the warnings below before beginning the instal-

lation procedure.

WARNINGS

1)

Ensure that the vehicle’s battery is disconnected before 
you start the installation procedure, and that it remains 
disconnected during the procedure.

2)

Do not smoke or use open flames when working near 
the vehicle’s fuel system.

3)

Ensure that the vehicle’s electrical cables, hydraulic 
lines, fuel lines and safety equipment are not damaged 
during installation.

4)

Ensure that normal control and operation of the vehicle 
is not impaired by the installation, particularly the 
brakes and steering.

5)

Electronic and other sophisticated systems 
(e.g. speed control, abs anti-lock brake, fuel injection, 
navigation and air bag systems) are relatively immune 
to malfunction caused by nearby radio transmissions. 
However, should you experience false operation of 
these systems or are in any doubt whatsoever as to 
their functionality, please consult the vehicle’s dealer.

CARK-91USANDH07.26.00.fm  Page 1  Wednesday, July 26, 2000  1:56 PM

Содержание CARK-91H













Отзывы: