for the international access code may not work in all regions. In this case, enter
the international access code directly.
2.
To make the call, press the call key.
3.
To end the call (or to cancel the call attempt), press the end key.
Pressing the end key always ends a call, even if another application is active.
To make a call from the contacts list, select
Menu
>
Contacts
. Go to the desired
name. Or, select the search field, enter the first letters or characters of the name,
and go to the name. To call the contact, press the call key. If you have saved several
numbers for a contact, select the desired number from the list, and press the call
key.
During a call
Mute or unmute the microphone
— Select or .
Put an active voice call on hold
— Select
or .
Activate the loudspeaker
— Select . If you have attached a compatible
headset with Bluetooth connectivity, to route the sound to the headset, select
Options
>
Activate BT handsfree
.
Switch back to the handset
— Select .
End a call
— Select .
Switch between active and held calls
— Select
Options
>
Swap
.
Tip:
To put an active call on hold, press the call key. To activate the held call,
press the call key again.
Send DTMF tone strings
1.
Select
Options
>
Send touch tones
.
2.
Enter the DTMF string or search for it from the contacts list.
3.
To enter a wait character (w) or a pause character (p), press
*
repeatedly.
4.
To send the tone, select
OK
. You can add DTMF tones to the phone number or
DTMF field in contact details.
End an active call and replace it with another incoming call
— Select
Options
>
Replace
.
End all calls
— Select
Options
>
End all calls
.
Many of the options that you can use during a voice call are network services.
Make calls
© 2010 Nokia. All rights reserved.
26
11/09/2010
FCC
Draft