background image

ENGLISH

the volume key down for about 5 
seconds when the headset is 
connected to a device. The yellow 
indicator light flashes once.

To turn the lights back on, press and 
hold the multifunction key, and slide 
and hold the volume key up for about 
5 seconds. The green indicator light 
flashes once.

Clear settings or reset

To clear all the settings from the 
headset (including settings you have 
defined with the Nokia Accessory 
Setup Application), switch off the 
headset, and press and hold the 

multifunction key for about 8 seconds. 
The headset beeps twice, and the red 
and green indicator lights alternate. 
After the settings are cleared, the 
headset enters pairing mode.

To reset the headset if it stops 
functioning, even though it is charged, 
connect the headset to a charger 
while you press and hold the 
multifunction key.

Troubleshooting

If you cannot connect the headset to 
your compatible device, make sure the 
headset is charged, switched on, and 
paired with the device.

Battery and charger information

This device has an internal, 
nonremovable, rechargeable battery. Do 
not attempt to remove the battery from 
the device as you may damage the 
device. This device is intended for use 

when supplied with power from the 
following chargers: AC-3, AC-4, AC-5, 
AC-8, AC-15, and DC-4. The exact 
charger model number may vary 
depending on the type of plug. The plug 

Содержание BH-609
















Отзывы: