background image

ENGLISH

To switch off, press and hold the 
multifunction key for about 5 seconds. 
The headset beeps, and the red 
indicator light is briefly displayed. If 
the headset is not connected to a 
device within about 30 minutes, it 
switches off automatically.

Pair and connect the headset

Before using the headset, you must 
pair and connect it to a compatible 
device.

You can pair the headset with up to 
eight devices, but you can connect it 
to a maximum of two devices at a 
time.

1. Make sure your mobile device is 

switched on and the headset is off.

2. If the headset has not been 

previously paired with a device, 
switch on the headset. The headset 
enters pairing mode, and the blue 

indicator light starts to flash 
quickly.

If the headset has been previously 

paired with a device, make sure the 
headset is switched off, and press 
and hold the multifunction key for 
about 5 seconds until the blue 
indicator light starts to flash 
quickly.

3. Within about 3 minutes, activate 

the Bluetooth feature on your 
device, and set it to search for 
Bluetooth devices. For details, see 
the user guide of your mobile 
device.

4. Select the headset from the list of 

found devices.

5. If necessary, enter the passcode 

0000

 to pair and connect the 

headset to your device.

In some devices, you may need to 

make the connection separately 
after pairing.

Содержание BH-609
















Отзывы: