ENGLISH
Charge the battery
1. Connect the charger to a wall
outlet.
2. Connect the charger cable to the
charger connector. The red
indicator light is displayed during
charging.
Charging the battery fully may take
up to 1 hour. Charging the battery
with the AC-5 charger for
15 minutes provides up to 5 hours
of talk time.
3. When the battery is fully charged,
the green indicator light is
displayed. Disconnect the charger
from the headset, then from the
wall outlet.
The fully charged battery has power
for up to 7 hours of talk time or up to
160 hours of standby time.
To check the battery charge when the
headset is not connected to a charger,
press the power key when the headset
is connected to a mobile device. If the
indicator light is green, the charge
level is sufficient. If the light is yellow,
you may need to recharge the battery
soon. If the light is red, recharge
the battery.
When the battery charge is low, the
headset beeps every 5 minutes and
the red indicator light flashes.
Switch on or off
To switch on, press and hold the power
key for about 2 seconds. The headset
beeps, and the green indicator light
flashes slowly while the headset tries
to connect to one or two last
connected devices. When the headset
is connected to at least one device and
is ready for use, the blue indicator
light flashes slowly. If the headset has
not been paired with a device, it
automatically enters pairing mode.
9218881_EN-US_1.fm Page 5 Friday, September 11, 2009 6:01 PM
