34
M e s s a g i n g
To erase a character, press the clear key. To erase more characters, press and hold
the clear key.
To insert a space, press
0
. To move the cursor to the next line, press
0
three times.
■
Copy and delete text
1. To select letters and words, press and hold
#
, and at the same time scroll left or
right. To select lines of text, press and hold
#
, and at the same time scroll up or
down.
2. To copy the text, press and hold
#
, and at the same time select
Copy
.
To delete the selected text, press the clear key.
3. To insert the text, scroll to the insertion point, press and hold
#
, and at the
same time select
Paste
.
6. Messaging
Before you can receive or send messages or e-mail, you must have the necessary
settings and access points defined. Contact your service provider for the settings.
■
Write and send messages
Your device supports the sending of text messages beyond the character limit for a single
message. Longer messages are sent as a series of two or more messages. Your service
provider may charge accordingly. Characters that use accents or other marks, and characters
from some language options, take up more space, limiting the number of characters that can
be sent in a single message.
The wireless network may limit the size of MMS messages. If the inserted picture exceeds
this limit, the device may make it smaller so that it can be sent by MMS.
Only devices that have compatible features can receive and display multimedia messages.
The appearance of a message may vary depending on the receiving device.
1. Select >
Messaging
>
New message
and the message type. To create a text
message or multimedia message, select
Message
. The message type changes
automatically based on the content.
2. In the
To
field, enter the phone numbers or e-mail addresses of the recipients,
or, to select recipients from Contacts, press the scroll key. Separate recipients
with a semicolon (;).
