Nokia 8830 S, Руководство пользователя

Страница: 8 / 33

GB 8
The box for your DMP should contain the
following items:
• the DMP
• a Remote control with 2 AAA batteries
• an Audio/Video cable(fully featured 1,0 metre)
• an AC power cord
• an Owner’s Manual
• a Software License agreement
INSTALLATION OF THE DMP
About the Audio/Video sockets
• The rear panel of the DMP is equipped with 4 Phono sockets
(see figure on page 6).
• Audio/Video cables are also necessary to get stereo sound
from a stereo TV and video recorder.
AC power
cord
Owner’s manual
License
agrement
Audio/Video
cable
Preparing the Remote Control
• Remove the cover on the battery compartment at the bottom
of the remote control.
• Insert the 2 AAA (1,5 V) batteries, as shown in the diagram,
taking care to observe the + and - markings indicated inside.
• Replace the cover.
Installing the Satellite Dish
• See the ”Fitting instructions for satellite dish” on how to in-
stall the dish.
• Connect the coaxial cable, with F-connectors fitted, from the
LNB on the satellite dish to the socket marked ”ANTENNA”
on the rear panel of the DMP.
Connecting the DMP to the Dish
If you need to fit the F-connectors onto the cable
• Prepare each end of the cable as shown in the diagram. You
will need to fold back the outer braid (as shown).
• Slide the F-connector onto the cable, then turn it clockwise
until it grips the braid.
• Ensure that 3 mm of the core is protruding from the end of the
connector.
8 mm
15 mm
3 mm
F-connector