background image

3

CONFIDENTIAL

Copyright © 2007 NOKIA. All rights reserved.

7900 Prism RM-264

Page

(8)

ISSUE 

Service Manual Level &2

CHANGE HISTORY

.

Status

Version No.

Date

Comments

Draft

0.1

07.Sept.2007

Initial draft

Approved

1.0

12.Sept.2007

Approval

COPYRIGHT

2.

The purpose of this document is to help NOKIA service levels 1 and 2 workshop technicians to carry out service to 

NOKIA products. This Service Manual is to be used only by authorized NOKIA service suppliers, and the content of it is 

confidential. Please note that NOKIA provides also other guidance documents (e.g. Service Bulletins) for service sup-

pliers, follow these regularly and comply with the given instructions.

While every endeavor has been made to ensure the accuracy of this document, some errors may exist.

If you find any errors or if you have further suggestions, please notify NOKIA using the address below:

CMO Operation & Logistics

Training  and Vendor Development

Multimedia Creation & Support

mailto:[email protected]

 

 

 

 

 

Please keep in mind also that this documentation is continuously being updated and modified, so watch always out 

for the newest version.

Copyright © 2007 Nokia. All rights reserved.

Reproduction,  transfer,  distribution  or  storage  of  part  or  all  of  the  contents  in  this  document  in  any  form

without the prior written permission of Nokia is prohibited.

Nokia,  Nokia  Connecting  People,  and  Nokia  X  and  Y  are  trademarks  or  registered  trademarks  of  Nokia

Corporation.  Other  product  and  company  names  mentioned  herein  may  be  trademarks  or  tradenames  of

their respective owners.

Nokia  operates  a  policy  of  continuous  development.  Nokia  reserves  the  right  to  make  changes  and

improvements to any of the products described in this document without prior notice.

Under  no  circumstances  shall  Nokia  be  responsible  for  any  loss  of  data  or  income  or  any  special,  incidental,

consequential or indirect damages howsoever caused.

The  contents  of  this  document  are  provided  “as  is”.  Except  as  required  by  applicable  law,  no  warranties  of

any  kind,  either  express  or  implied,  including,  but  not  limited  to,  the  implied  warranties  of  merchantability

and  fitness  for  a  particular  purpose,  are  made  in  relation  to  the  accuracy,  reliability  or  contents  of  this

document.  Nokia  reserves  the  right  to  revise  this  document  or  withdraw  it  at  any  time  without  prior  notice.

The availability of particular products may vary by region.

IMPORTANT

This document is intended for use by qualified service personnel only.

Содержание 7900 - Prism Cell Phone 1 GB



















Отзывы: