NMM-3
Company Confidential
5 - Disassembly Instructions
CCS Technical Documentation
Page 5-12
Copyright
2003 Nokia Corporation.
Issue 1 (11/2003)
Company Confidential
4. Turn the B-Cover over once the
boot is aligned and push the boot
retention clips into the recesses in
the B-Cover so they are visible from
the outside of the B-Cover.
5. Assemble the camera window
adhesive to the camera window
annulus on the B-Cover, ensuring it is
centrally fitted and the yellow back-
ing tape is removed.
6. Align the camera window to the
B-Cover using the alignment feature
in both the window and the B-Cover.
Press down on the edges of the win-
dow (taking care not to damage it)
until all three clips snap home to the
B-Cover.
Note:
Ensure the B-Cover is supported underneath when the window is assembled. Assembly
force must be at least 60N/cm² for at least 6 seconds.
7. Take an IR window and snap it into
the B-Cover ensuring that it is orien-
tated the correct way around. Assem-
ble the right hand side clip first into
the B-Cover then snap the second
clip into place.
Note:
Ensure the front and back of
the window is not cosmetically dam-
aged by wearing soft gloves when
pressure is applied to the window.
4
6
7